Reason for discount: 1 piece. Motion sensor light. Wood grain finish. Round shape. Indoor. Entrance. LED light.

Dark Brown, 1 pc.

Note: If the light does not turn on when the switch is set to ON (always on), try moving it back slightly (about 1-2mm) and it should light up.

◇Product Description◇
● A stylish wood-grain sensor light.
● Recommended for use as a night light in hallways, entrances, etc.
● Choose from the following two lighting modes:
- Always On (ON): Stays lit regardless of the surrounding environment.
- Sensor On (AUTO): Lights up when it detects darkness and human movement (equipped with a light sensor and motion sensor).
● In sensor mode, it only lights up in the dark when human movement is detected, preventing unnecessary lighting during the day and extending battery life.
● It automatically turns off after a period of no motion detection, so you don't have to worry about forgetting to turn it off.
● USB rechargeable, so no troublesome wiring or drilling is required.
● No need to buy dry batteries; it can be recharged and used repeatedly.
● The magnetic mounting allows it to be quickly detached and used as a flashlight during power outages.
● Its compact size makes it suitable for various locations, such as near light switches in rooms at night, as footlights on stairs, under beds, inside drawers, and more.

◇Specifications◇
?Dimensions: Approx. 9cm diameter x 2.3cm height
?Power Source: USB rechargeable
?Motion Sensor Detection Range: Within approx. 3m
?Motion Sensor Detection Angle: Approx. 120 degrees
?Sensor Lighting Time: Approx. 30 seconds
?Weight: 63g
?Built-in Battery Capacity: 600mAh (Up to 8 hours continuous on always-on mode, up to 90 days standby on sensor mode with 4 activations per day)
?Material: ABS/PC

※Please note the following※
?In sensor mode, the light will not turn on even if movement is detected if light enters the sensor area, so please be aware of this.
?This product is not waterproof, so please do not use it outdoors.
?For walls with materials that easily peel off double-sided tape or uneven surfaces, there is a risk of falling. Please consider an installation method that suits the mounting surface without using double-sided tape. Damage caused by the product falling due to the double-sided tape may not be covered by the warranty, so please understand this in advance.